There are a number of options available for mounting the Paglight directly to the camera:
Paglight is supplied with a 1/4" Whit. male to male Stud Adaptor that enables you to mount the Paglight directly to a camera, or to the Camera Clamp.
Paglight is also supplied with a 1/4" Whit. Camera Shoe Plate that enables you to mount the Paglight directly to any camera equipped with an accessory shoe.
|For hand-held applications a Handle with a 1/4" Whit. stud can be screwed directly into the Paglight base. Always tighten the locking wheel firmly; this will secure the base while retaining the swivelling facility. The Handle also enables the light to be mounted to the camera in an elevated position.
The Extender Arm allows flexibility in the positioning of the Paglight when mounted on the camera. For example, it can lift the Paglight clear of the microphone, to
|avoid the casting of any shadows. In addition, the Extender Arm can be locked to the left or right of centre, allowing the subject to be lit from the side. Includes shoe for Sony type mounts and an adaptor and shoe plate for Panasonic type mounts.
PAG also produces a range of Mounting Adaptors which enable the Paglight, to be mounted to any camera, tripod, lighting rig or gaff grip.
Camera Clamp 1/4" Whit.
Handle 1/4" Whit. stud to bush, length 127mm.
Spigot Adaptor 1/2" dia. to 1/4"Whit.